Home › Forums › Resident Engineer’s Toolbox › Piling Resources
Tagged: H-Piling, Pile Driving, Pile Hammers, Sheet Piling
- This topic has 16 replies, 2 voices, and was last updated 6 months ago by Hilde.
-
AuthorPosts
-
-
08/09/2020 at 8:12 AM #9483HildeModerator
This is my “All Things Piling” Toolbox. In it you will find:
• Links to articles I’ve written
• Links to outside articles that I’ve found useful
• Links to web resources that I found helpful -
08/09/2020 at 10:48 AM #9510HildeModerator
Great resource – Pile Buck’s 2019 Resource Catalog
Pile Buck 2019 Resource Catalog -
10/22/2021 at 9:23 AM #19033HildeModerator
Excellent resource for understanding the differences in pile leads
-
10/22/2021 at 9:27 AM #19034HildeModerator
The Berminghammer website has some excellent resources & links
-
10/22/2021 at 9:30 AM #19035HildeModerator
Hammer & Steel has some excellent links & resources. Check out the Resources tab for H and sheet piling
This is a quick-link to Hammer & Steel’s “H-Piling Properties” page
https://www.hammersteel.com/h-piling.htmlAdding an additional link to Nucor/Skyline – All-Things-Piling
-
10/22/2021 at 9:33 AM #19036
-
10/26/2021 at 10:01 AM #19151HildeModerator
Check this great resource out from Vulcanhammer.net!
-
11/09/2021 at 9:33 AM #19433BobKeymaster
I needed some information on defining “refusal” looking for some sort of criteria. I found an excellent 2-manual set from the USDOT:
Publication No. FHWA-NHI-16-009
Design and Construction of Driven Pile Foundations – Volume I & IInhi16009_v1
nhi16009_v2I’ve added the pdf excerpt that discusses refusal.
- This reply was modified 2 years, 11 months ago by Bob.
Attachments:
-
11/26/2021 at 3:58 PM #19844
-
11/26/2021 at 4:05 PM #19846HildeModerator
I’ve written about the Saximeter method for determining ram fall height. I saved these videos as they provide pile driving footage that is lengthy enough to practice using a stopwatch for getting your 5-blow counts, practice mental blow counting + stopwatch use.
-
01/31/2022 at 1:04 PM #21352HildeModerator
Pile Buck is a great resource. Here is a great summary on drilled shafts & use of casings:
-
02/02/2022 at 10:22 AM #21407HildeModerator
I don’t think you can find a better article on pile driving basics than this one: Pile Buck is an OUTSTANDING resource!!
-
02/16/2022 at 7:15 AM #21777HildeModerator
I found an excellent site with information about tiebacks
-
02/17/2022 at 9:05 AM #21838HildeModerator
This is a small collection of links for PDA & WEAP resources. GRL Engineers has a great website with plenty of helpful links & papers
-
03/08/2022 at 7:29 AM #22499HildeModerator
This is a great resource on tieback theory and installation techniques. I’ve included a link to Prof. Kitch’s YouTube page, there are several LMS courses he has posted-Great work!!!
-
05/09/2022 at 1:02 PM #24076HildeModerator
This is an incredible resource for ground anchors & tiebacks. Many of the linked references are out-of-print, but they contain valuable, timeless information
-
04/11/2024 at 1:18 PM #40247HildeModerator
An excellent tieback reference
https://www.solcon.fi/wp-content/uploads/2019/03/TITAN-Anchorages-for-retaining-structures.pdf
-
-
AuthorPosts
- You must be logged in to reply to this topic.